Toshiba Injection Moulding (UK Branch)

 

IS-GS/GT

 

Large Size Machine Series

High performance, yet easy to operate, these super large-sized machines are built to meet the needs of the new century.
Improved design for use in a factory automation (FA) system, this highly efficient machine series is equipped with such features as a compactly built and highly reliable composite type mould clamping unit for great space savings, the INJECTISOR injection controller - ultimate in simplified machine operation, faster mould opening and closing speeds, and a mould changing system for high cycle operations.

 

IS-DF

IS-DG

 

IS-DF/DG Series Specifications
ITEM IS1050GT IS1300DF IS1600DF IS1600DFW IS1800DF
Injection Unit i81 i110 i150 i150 i150
Screw Diameter mm 105 120 115 125 125 140 125 140 125 140
Injection Weight (PS) g 3980 5200 6040 7130 7750 9730 7750 9730 7750 9730
Injection Pressure MPa 183 140 167 141 171 137 171 137 171 137
Plasticizing Capacity (PS) kg/h 490 580 600 650 590 540 590 540 590 540
Clamping Force kN 1045 12700 15700 15700 17600
Distance Between Tie Bars (HxV) mm 1265x1265 1325x1280 1520x1265 1800x1500 1785x1485
Clamp Stroke mm 1750 1800-1300 2400-1700 2400-1700 2400-1700
Open Daylight (Max) mm 2250 2000-2500 2500-3200 2500-3200 2500-3200
Motor for Pump kW 55+55 45+45+45 45+45+45 45+45+45 45+45+45
Oil Tank Capacity Litres 1420 1950 2500 2500 2500
Machine Dimensions L 8.9 9.2 9.9 10.2 11.7 12.0 11.7 12.0 11.7 12.0
WxH 2.7x2.3 3.1x2.7 3.3x2.9 3.7x3.2 3.7x3.2
Machine Weight t 37.5 64 80 95 100

(Note)

  1MPa=10.2kgf/cm2,1kN=102kgf.

1)

  Due to continuous improvement, specifications are subject to change without notice.

2)

  Max. injection pressure and max. holding pressure are power of injection unit, not resin pressure.
  They are limited according to moulding condition.

 
ITEM   IS2200DF IS2500DF IS3000DF IS3500DF
Injection Unit Code   i200 i200 i315 i315
Screw Diameter mm 140 160 140 160 160 180 160 180
Injection Weight (PS) g 10890 14230 10890 14230 16260 20590 16260 20590
Injection Pressure MPa 170 130 170 130 173 137 173 137
Plasticizing Capacity (PS) kg/h 690 690 690 690 820 730 820 730
Clamping Force kN 21500 24500 29400 34300
Distance Between Tie Bars (HxV) mm 1800x1600 1800x1600 1900x1800 1900x1800
Clamp Stroke mm 2600-1800 2600-1800 2700-1800 2700-1800
Open Daylight (Max) mm 2700~3500 2700~3500 2800~3700 2800~3700
Motor for Pump kW 45+45+45+37 45+45+45+37 55+55+55+37 55+55+55+37+37
Oil Tank Capacity Litres 3700 3700 4200 5600
Machine Dimensions L 13.5 13.9 13.5 13.9 14.5 15.0 15.4 15.9
WxH 4.0x3.6 4.0x3.6 4.3x3.9 4.8x4.1
Machine Weight t 150 150 200 220

 

(Note)

  1MPa=10.2kgf/cm2,1kN=102kgf.

1)

   Due to continuous improvement, specifications are subject to change without notice.

2)

   Max. injection pressure and max. Holding pressure are power of injection unit, not resin pressure.
 They are limited according to moulding conditions.

 
 
 Top of the Page Copyright(C) 1997-2006 TOSHIBA MACHINE CO.,LTD. All Rights Reserved.