Toshiba Injection Moulding (UK Branch)

Small, High Precision Machine Specifications

 

EC20PNII

 

Please Select Machine Size

EC20PII EC40NII EC60NII

 

ITEM

 EC20PNII
 Injection Unit Code

i0.4

 Barrel Code Y A B
 Screw Diameter mm 16 18 20
 Injection Volume Calculated cm2 14.5 18.3 22.6
 Injection Weight PS g 13 16 20
PE g 10 13 16
 Injection Pressure (Max) MPa 278 220 178
kg/cm2 2830 2240 1810
 Holding Pressure (Max) MPa 278 220 178
kg/cm2 2830 2240 1810
 Injection Speed mm/s 425
 Injection Speed (High Speed) mm/s 550
 Injection Rate cm3/s 85 108 134
 Injection Rate (High Speed) cm3/s 111 140 173
 Plasticising Capacity

PS

 kg/h 8 12 14
 Screw Speed (Max) min-1 480 480 430
 Clamping Force kN (tf) 196 (20)
 Distance Between Tie Bars (HxV) mm 280x280
 Platen Dimensions mm 390x390
 Clamp Stroke mm 230
 Open Daylight (Max) mm 530
 Mould Thickness (Min~Max) mm 150~300
 Ejector Force kN (tf) 8 (0.8)
 Ejector Stroke mm 50
 Heating Capacity kW 3.4 3.8
 Machine Dimensions

LxWxH

 m 2.9x1.0x1.6 2.8
 Machine Weight t 1.9

 

EC40NII

 

Please Select Machine Size

EC20PII EC40NII EC60NII

 

ITEM

 EC40NII
 Injection Unit Code

i0.4

 i1 i1.5
 Barrel Code Y A B Y A B Y A B
 Screw Diameter mm 16 18 20 22 25 28 25 28 32
 Injection Volume Calculated cm2 14.5 18.3 22.6 38 49 62 55 69 90
 Injection Weight PS g 13 16 20 35 45 57 51 63 83
PE g 10 13 16 28 36 45 40 50 66
 Injection Pressure (Max) MPa 272 216 174 258 200 159 245 196 150
kg/cm2 2770 2200 1770 2630 2040 1620 2500 2000 1530
 Holding Pressure (Max) MPa 272 216 174 258 200 159 245 196 150
kg/cm2 2770 2200 1770 2630 2040 1620 2500 2000 1530
 Injection Speed mm/s 425 400 325
 Injection Speed High Speed) mm/s 550 500 400
 Injection Rate cm3/s 60 76 94 152 196 246 98 123 161
 Injection Rate (High Speed) cm3/s 60 76 94 190 245 308 98 123 161
 Plasticising Capacity

PS

 kg/h 8 12 14 22 28 35 25 35 45
 Screw Speed (Max) min-1 480 480 420 420 420 380 380 380 320
 Clamping Force kN (tf) 390 (40)
 Distance Between Tie Bars (HxV) mm 320x320
 Platen Dimensions mm 460x460
 Clamp Stroke mm 250
 Open Daylight (Max) mm 570
 Mould Thickness (Min~Max) mm 150~320
 Ejector Force kN (tf) 20 (2.0)
 Ejector Stroke mm 60
 Heating Capacity kW 2.8 3.2 4.7 5.4 5.5
 Machine Dimensions

LxWxH

 m 3.4x1.1x1.6 3.5x1.1x1.6 3.5x1.1x1.6 3.6
 Machine Weight t 2.3 2.6 2.7

 

EC60NII

 

Please Select Machine Size

EC20PII EC40NII EC60NII

 

ITEM

 EC60NII
 Injection Unit Code

i1

 i1.5 i2
 Barrel Code Y A B Y A B Y A B
 Screw Diameter mm 22 25 28 25 28 32 28 32 36
 Injection Volume Calculated cm2 38 49 62 55 69 90 79 103 130
 Injection Weight PS g 35 45 57 51 63 83 72 94 120
PE g 28 36 45 40 50 66 57 75 95
 Injection Pressure (Max) MPa 253 196 156 251 200 153 256 196 154
kg/cm2 2580 2000 1590 2550 2040 1560 2610 2000 1570
 Holding Pressure (Max) MPa 253 196 156 251 200 153 256 196 154
kg/cm2 2580 2000 1590 2550 2040 1560 2610 2000 1570
 Injection Speed mm/s 325
 Injection Speed (High Speed) mm/s 400
 Injection Rate cm3/s 76 98 123 160 200 261 123 161 204
 Injection Rate (High Speed) cm3/s 114 147 185 196 246 322 185 241 305
 Plasticising Capacity

PS

 kg/h 22 28 35 25 35 45 40 61 83
 Screw Speed (Max) min-1 420 380 390 320 400 390 350
 Clamping Force kN (tf) 585 (60)
 Distance Between Tie Bars (HxV) mm 375x360
 Platen Dimensions mm 570x555
 Clamp Stroke mm 300
 Open Daylight (Max) mm 670
 Mould Thickness (Min~Max) mm 150~370
 Ejector Force kN (tf) 20 (2.0)
 Ejector Stroke mm 70
 Heating Capacity kW 4.0 4.5 5.8 6.6 5.6
 Machine Dimensions

LxWxH

 m 3.7x1.2x1.6 3.8x1.2x1.6 3.8 3.9x1.2x1.6 4.0
 Machine Weight t 3.0 3.0 3.2
   
 

(Note)

1.

Due to continuous improvement, specifications are subject to change without notice.

2.

Max. injection pressure and max. Holding pressure are power of injection unit, not resin pressure.
They are limited according to moulding conditions.

3.

Values marked with* vary with optional High-speed injection unit.

4.

1MPa=10.2kgf/cm2, 1kN=102kgf, 1mN=0.102gf

 
 

Top of the Page

Copyright(C) 1997-2006 TOSHIBA MACHINE CO.,LTD. All Rights Reserved.